Metallurgical Microscopes

TECHNICAL SPECIFICATIONS:

Trinocular Observation Head

• Siedentopf observation head inclined at 30° rotatable at 360°.
• Vertical phototube for micro photography.
• Diopter adjustment ring on ocular tube (±5).
• Interpupillary distance from 52mm to 75mm.
  
  Standard Accessories
  • 12V/50W halogen tungsten bulb, operating manual, dust cover, guarantee card and styrofoam molded pack.
    
    Eyepiece
    • Wide field eyepiece 10X (paired)
    • F.O.V. 22mm.
      
      Objectives (Infinity corrected)
      • M Long working distance plan 10X (WD 11.0mm)
      • M Long working distance plan 20X ( WD 9.0mm)
      • M Long working distance plan 50X (WD 3.8mm)
      • M Long working distance plan 100X (S.L.) Dry (WD .0.4mm)
        
        Mechanical Body
        • Co-axial focusing system with large knobs, PRE-FOCUSING LEVER & TENSION ADJUSTMENT RING.
        • Quadruple nosepiece on ball bearing.
        • Mechanical stage is 180mm X 155mm. Moving range 80mm X 50mm.
        • Mechanical stage has low positioned co-axial controls on ball bearing guide ways.
          
          Illuminator
          • Epi-Koehler’s illumination. Aperture iris diaphragm halogen lamp 12V/50W AC 85-230V.
          • Adjustable brightness. Filter wheel fixed in light path with blue, green & yellow filters.
            
            Polarizing Outfit
            • Analyzer rotatable at 360°. Polarizer & Analyzer can be slide in/out of the optical path.
            
            WESWOX microscopes are better in performance as compared to Olympus, Nikon and other brands